← All products
Liquid
Reset Blue Pak 6 g
(6) 1 g tablets
- Liquid deodorization: makes 1.5 gallons (100 ppm)
- Each 1 g tablet makes 32 oz of 100 ppm solution
Not recommended for confined-space gassing. Use Reset Red, Purple or Black for gas applications.


Liquid activation & application
Each Blue tablet makes 32 oz of standard 100 ppm solution.
- 1Fill an opaque 1 liter (32 oz) container with tap water.
- 2Drop one Reset Blue tablet into the water to generate a standard 100 ppm ClO₂ solution.
- 3Put the cap on the container and wait 3 minutes for the product to mix and generate properly.
- 4Apply directly to the atmosphere, surfaces, clothing, uniforms, furniture, upholstery and materials requiring treatment. Use on targeted porous and non-porous surfaces with a mop, sponge, cloth or coarse pump sprayer.
- 5DO NOT WIPE. LET DRY. DO NOT RINSE. The product works as it dries, so surfaces and atmospheres only need to be lightly wetted.
Do not use products above Reset usage levels. For best results, use both the liquid surface and gas protocols.
Typical uses
- Carpet & upholstery
- Add Reset (standard level) to the RINSE cycle of your wet vacuum.
- Hand & spot cleaning
- Apply Reset (standard level) directly to surfaces and materials.
- General deodorization
- For the atmosphere and all surfaces, use Reset standard level liquid. Spray everywhere — RV, boat, auto, bedroom, bathroom, kitchen, living room, garage, basement, laundry room, etc.
- Athletic uniforms & equipment
- After determining that there is no discoloration, thoroughly dampen (spray, dip or sponge) treatment surface areas with standard level Reset and allow to dry.
- Home & office
- Apply a standard level Reset solution to freshen any space and clean the system filters and tubing. No evacuation required.
- Pet & animal
- Spray standard level Reset onto the source of the offending odor — the wet dog, the smelly hamster cage, litter box, favorite pillows, kennels and animal stalls. Effective on skunk odor. No rinse required.
- Washing machines & dishwashers
- Add 4 Blue tablets to an empty standard front- or top-load washer without detergent. Run a quick WASH cycle.
Storage & disposal
- Liquid ClO₂ must be generated and stored in capped containers.
- Store capped Reset ClO₂ solutions away from direct sunlight, in a cool, dry place. The solution will maintain full strength for up to 12 weeks in these ideal storage conditions.
- Once the solution is clear, it is not active and must be replaced. Verify with ClO₂ test strips.
- Store this product in the original unopened packaging until ready for use, in a cool, dry, well-ventilated area away from heat or open flame, and out of reach of children.
- Do not leave product in direct sunlight, or expose to temperatures above 120°F (49°C).
- Do not contaminate water, food or feed by disposal or storage.
- Emergency handling: in case of spill, contamination or decomposition, do not reseal the package. If possible, isolate the package and discard it in an open, well-ventilated area.
Precautions & first aid
DANGER: KEEP OUT OF REACH OF CHILDREN. Do not ingest. Reset ClO₂ (chlorine dioxide) is a harmful, corrosive and powerful chemical substance that is a lung and eye irritant. Always use and handle with caution; wear an appropriate P100 respirator mask and goggles as advised on the SDS.
- This product contains an oxidizing agent. Do not mix with acids or chlorine. Avoid any contact with flame or burning materials. Once activated with water, it will produce dangerous levels of chlorine dioxide gas.
- Chlorine dioxide gas is a strong oxidizing agent and is irritating to the respiratory tract. Symptoms of exposure depend on concentration and exposure time; they include lacrimation, headache, vomiting, severe cough, asthmatic bronchitis, dyspnea and even death. Do not inhale chlorine dioxide. Do not allow unprotected persons to be exposed to chlorine dioxide gas. Wear appropriate PPE when working with chlorine dioxide gas.
- Causes moderate eye irritation. Harmful if swallowed, inhaled or absorbed through skin. Avoid contact with skin, eyes or clothing. Avoid breathing vapor. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse.
- Reset ClO₂ application usage solutions are known to work on tile, marble, stone, steel, plastics, rubber, vinyl, fabrics and wood. Always test the product in a small non-visible section first to make sure there are no unintended effects on your material.
First aid
- Dry product — skin
- Brush off loose product. Rinse skin immediately with plenty of water, then wash the area with soap and water. Call a poison control center or doctor for advice if the issue persists.
- Dry product — eyes
- Hold eye open and rinse slowly and gently with water for 15–20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing the eye. Seek medical attention immediately.
- Dry product — ingestion
- Call a poison control center or doctor immediately for treatment advice. Have the person drink large quantities of water if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
- Liquid (activated) — skin
- Remove contaminated clothing. Rinse skin immediately. If irritation persists, obtain medical attention. Wear nitrile gloves with prolonged exposure.
- Liquid (activated) — eyes
- Hold eye open and rinse slowly and gently with water for 15–20 minutes. If irritation persists, obtain medical attention.
- Liquid (activated) — ingestion
- Call a poison control center or doctor immediately for treatment advice. Have the person drink large quantities of water, milk or gelatin if able to swallow. Do not induce vomiting unless told to do so by a poison control center or doctor. Do not give anything by mouth to an unconscious person.
- Inhalation
- Harmful if inhaled and could cause coughing, headaches, difficulty breathing and pulmonary edema. Always use a NIOSH-approved respirator when exposure is great, or when working with any chlorine dioxide gas application. If inhalation occurs, remove the person to fresh air. If not breathing, call 911 or an ambulance, then give artificial respiration and seek medical attention.
Have the product container or label with you when calling a poison control center or doctor or going for treatment.
SDS — Fast Release (PDF)